Replacement Of Battery Indicator D210 - Siemens MOBILETT Plus HP Service Instructions Manual
Hide thumbs
Also See for MOBILETT Plus HP:
- Maintenance instruction (64 pages) ,
- Installation and setting instructions manual (28 pages) ,
- Service manual (25 pages)
Table of Contents
Advertisement
7 - 8
•
Remove the board including the aluminium plate.
NOTICE
•
Replace the board.
Replacement of battery indicator D210
•
Remove the right cover and the cover with the cassette compartment.
•
Remove the two screws (pos. 1 / Fig. 15).
•
Disconnect K203.
•
Replace the battery indicator.
MOBILETT Plus HP
Battery circuit and power conversion unit
If the MOBILETT Plus HP is equipped with the DAP measuring
system (optional):
The power supply for the DAP measuring system must be discon-
nected during this procedure. Make sure to remember how the
cables were connected, and if needed use the "Installation
Instructions, DAP measuring system, SPR8-220.031.04..." for
additional help.
SPR8-220.061.03
Rev. 03
Page 8 of 8
09.03
CS PS 24
7
Siemens AG
Medical Solutions
Hide quick links:
Advertisement
Table of Contents
