10 - 24
Replacing the supporting wheels
Equipment required: 1 piece of wood (approx. 50 x 70 x 500 mm)
•
Jack up the unit with the piece of wood.
•
Block the rear wheels so that they cannot turn.
•
Remove the locking rings (pos. 1 / Fig. 26).
•
Remove the wheel shaft so that the supporting wheel can be removed.
•
Install the new support wheel and secure the shaft with the locking ring.
•
Check that the wheels move easily.
•
Remove the wood block and lower the unit.
Fig. 26
MOBILETT Plus HP
1
SPR8-220.061.03
Rev. 03
09.03
Mechanical systems
Page 24 of 28
CS PS 24
Medical Solutions
10
Siemens AG