Table of Contents
Advertisement
Options and Accessories
Operation
Operation when Option 03 is installed is basically the same as the standard
AWG2021 operation. When a waveform is not being output, the waveform initial
data can be output to the connector. At this time, the clock is not generated.
When waveform output begins, the clock is generated and the data is updated.
NOTE. During the hold-off period, when loading a new waveform into waveform
memory and resetting the waveform memory, excess output is generated in the
data clock (see Figure 7–3).
Load, reset, hold off period:
Excess output can occur in
these periods.
Trigger
Signal
Waveform
Figure 7-3: Generation of Excess Output
7-5
AWG2021 Service Manual
Advertisement
Chapters
Table of Contents
