Adjustment Procedures
Cooling
CAUTION. To prevent damage to the AWG2021 due to over-heating, do not do the
adjustment procedures without providing additional cooling, as described below.
With the rear cover and cabinet removed, the AWG2021 assembly does not cool
properly while power is applied. A separate fan is needed to prevent heat
build-up. Place the fan so it blows air INTO the AWG2021 side near the
floppy-disk drive, as shown in Figure 5–1.
Figure 5-1: Cooling the AWG2021 During Adjustment Procedures
5-3
AWG2021 Service Manual