5-2-5. Stationary Heads Cleaning
Caution
Be careful not to damage the head surface when cleaning the stationary heads.
Tools
. Cleaning cloth: 3-184-527-01
. Cleaning fluid: 9-919-573-01
Procedure
1. Clean the tape-running surfaces of the AT head and CTL head in the vertical
direction using a cleaning cloth moistened with a cleaning fluid.
n
Be sure to remove the magnetic powder completely.
An error may occur in the playback if magnetic powder attaches to the head gap
portion of the AT head and CTL head.
2. After cleaning, wipe them using a dry cleaning cloth two or three times.
Exit head block
Cleaning
Entrance head block
Cleaning
DNW-A22/A22P
Stationary Heads Cleaning
AT head
CTL head
5-2. Cleaning
5-9