Table of Contents
Advertisement
consists of four blocks.
Set each source button and also set
the destination of each block using
the menu item [N : SET PANEL
TABLE].
VIRTUAL MONITOR= Virtual monitor function
TALLY GROUP (BKS-R1617A/R3219A)
Selects the tally group. Move the cursor to the position of
the desired tally (in the case of tally 2, second "_" from
the left) and press [Enter]. The item is toggled on and off
every time [Enter] is pressed.
(When the number is displayed, the item is ON. When "_"
is displayed, the item is OFF.)
n
BZR-2000 must be V1.60 or higher to use the following functions.
With BZR-2000, up to seven names other than the descrip-
tion name can be assigned to one source. Each of these
names is known as an "Alias". With BKS-R1617A/R3219A,
a set with a description and a custom Alias can be saved.
When using an S-BUS Alias name, the name set on BZR-
2000 must be sent to the control panel.
(For details of an Alias, see "5-2. Multiple Terminal Name
Function".)
ALIAS GROUP (BKS-R1617A/R3219A)
1 to 7= When using ALIAS name, select the group
number to be used from 1 to 7.
OFF= ALIAS groups cannot be used.
DESCRIPTION (BKS-R1617A/R3219A)
Sets whether to enable or disable description display.
DISABLE= Description names are not used. (During
situations when only ALIAS names are used,
those are used.)
ENABLE= Description names are used.
DESCRIP./ALIAS CHG. (BKS-R1617A)
Select the method to switch between description and Alias display.
EASY= Double-click on the [ASSIGN] button.
CAREFUL= Press and hold (for about three seconds) the
[DEST]+[ASSIGN] buttons.
To return to the menu screen of the secondary
station
Press [Ctrl] _ [E].
To return to the menu screen of the primary station
Press [Ctrl] _ [D].
3-18
(For more information about the
virtual monitor function, see "5-
3. Virtual Monitor Function".)
Z : SET PANEL STATUS
Purpose
This is the function to set the various modes of the remote
control unit. The multiple units can be connected in order
to expand the number of sources and destinations which
can be controlled simultaneously. Setting the mother panel
and the daughter panels is performed from this menu.
(Maximum ten mother panels can be set.)
Setting Procedure
1. Select menu item of the secondary station [Z].
2. The cursor appears in "DISPLAY MODE = 1".
Move the cursor to an arbitrary mode and press
[Enter] establishes the input mode.
3. Enter a number to select using the ten-keys.
When [Enter] is pressed to confirm the input number,
the cursor moves to the next setting item.
When you do not want to change the default value, do
not input any number, but press [Enter].
SONY ROUTING SYSTEM SETUP MENU
SET PANEL STATUS
DISPLAY MODE
= 1
1:STATUS
PROTECT MODE
= 2
1:ON AIR
PHANTOM PROTECT
= 1
1:PART PROT
PANEL MODE
= 1
1:STAND ALONE 2:MOTHER
PANEL LAYOUT
= 1
1:TYPE + NUM. 2:BPS
LEVEL MODE
= 1
1:SINGLE
DEST SELECTION
= *
1:DISABLE
ILLUMINATION LEVEL = 8
1-8:MIN-MAX
MONITOR DESTINATION = .......
SOURCE OFFSET
= 0000
CONTROL LEVELS
= --------
BLOCK & MOTHER STATION LIST
BLOCK 1 = .......
| BLOCK 6 = .......
BLOCK 2 = .......
| BLOCK 7 = .......
BLOCK 3 = .......
| BLOCK 8 = .......
BLOCK 4 = .......
| BLOCK 9 = .......
BLOCK 5 = .......
| BLOCK10 = .......
Ctrl-E:MENU Ctrl-D:RETURN
Example of Setting Screen
BKS-R3219A V2.23
STATION NUMBER 2
2:PROMPT
2:NORMAL
3:FLEXIBLE 4:FLEX & OA
2:FULL PROT 3:BUTTON LINK
3:DAUGHTER
3:KEYPAD
*:UNRELATED
2:MULTI
*:UNRELATED
2:ENABLE
*:UNRELATED
BKS-R3219A/R1617A I&SSM
Advertisement
Table of Contents
