Table of Contents
Advertisement
N : SET PANEL TABLE
Purpose
This menu is used to assign source/destination name to
each source/destination button.
Setting Procedure
1. Select menu item of the secondary station [N].
2. Select the parameter to set with the cursor keys.
n
Only the source selection button can be set for settings
other than phantom or the terminals named monitor,
TAKE, VTR, or level key.
3. When [Enter] is pressed, the panel table can be typed.
To delete the registration, press [Enter] before
inputting the name.
4. Enter the "Type + No." name or description name.
1) When [J : NAME STYLE (Type + Num)] is
selected in the primary station menu, input the
type name (between 0 and F) and the number for
the source and destination name.
2) When the primary station menu is "J: NAME
STYLE (DESCRIP. NAME)" (description name
mode), the input mode is changed every time that
[Ctrl] _ [N] is pressed, and the display alternates
between "Ctrl-N: DESCRIP. NAME" and "Ctrl-
N: Type+Num".
When "Ctrl_ N : Type + Num" is displayed on the
screen, it means that the name mode will be
changed to "Type + Number" by pressing [Ctrl] _ [N].
Description name input mode :
Input Description name from the first to seventh
characters using the alphabet and numerical keys.
"Type + Number" name input mode:
Input in the same way as 1).
n
If the Description name has been set for the input/output
number, the display of Description has priority to the
display of "Type + Number" even if the "Type + Number"
name is set.
5. When [Enter] is pressed, the source name is set.
BKS-R3219A/R1617A I&SSM
SONY ROUTING SYSTEM SETUP MENU
SET PANEL TABLE(SOURCE)
CONTROL DESTINATION = OUT001
01 KEY=IN001
02 KEY=IN002
05 KEY=IN005
06 KEY=IN006
09 KEY=....... 10 KEY=....... 11 KEY=....... 12 KEY=.......
13 KEY=....... 14 KEY=....... 15 KEY=....... 16 KEY=.......
17 KEY=IN009
18 KEY=IN010
21 KEY=IN013
22 KEY=IN014
25 KEY=....... 26 KEY=....... 27 KEY=....... 28 KEY=.......
29 KEY=....... 30 KEY=....... 31 KEY=....... 32 KEY=.......
SET PANEL TABLE(DESTINATION)
01 KEY=....... 02 KEY=....... 03 KEY=....... 04 KEY=.......
05 KEY=....... 06 KEY=....... 07 KEY=....... 08 KEY=.......
09 KEY=OUT001
10 KEY=OUT002
13 KEY=OUT005
14 KEY=OUT006
17 KEY=....... 18 KEY=....... 19 KEY=....... 20 KEY=.......
21 KEY=....... 22 KEY=....... 23 KEY=....... 24 KEY=.......
25 KEY=OUT009
26 KEY=OUT010
29 KEY=OUT013
30 KEY=OUT014
0=IN
1=OUT
2=SONY
3=VTR
8=PGM
9=CL
A=SL
B=L
G=L/A
H=REM
I=CAM
J=STDO
O=SAT
P=CG
Q=WETH
R=TEST
Ctrl-E:MENU Ctrl-D:RETURN Ctrl-N:DESCRIP.NAME T:TAKE M:MONI V:VTR E:LEVEL
Example of Setting Screen
m
1. In the BKS-R1617A, each button (key) can be set to
both source and destination. In case source and
destination are set to the same button (key), the DEST
button works as a destination button when the DEST
button lights in amber and the DEST button works as a
source button when the DEST button lights in green.
Be sure to set either source or destination on the
respective buttons (keys) when BKS-R3219A.
If both source and destination are set to the same
button (key), it will cause malfunction.
2. When setting description names to the source/destina-
tion buttons, select a name from the description name
group sent to the remote control unit.
If other names are input, these will not be set even if
the [Enter] button is pressed.
In such cases, transfer the group including the desired
description name from the primary station.
BKS-R3219A V2.23
STATION NUMBER 3
03 KEY=IN003
04 KEY=IN004
07 KEY=IN007
08 KEY=IN008
19 KEY=IN011
20 KEY=IN012
23 KEY=IN015
24 KEY=IN016
11 KEY=OUT003
12 KEY=OUT004
15 KEY=OUT007
16 KEY=OUT008
27 KEY=OUT011
28 KEY=OUT012
31 KEY=OUT015
32 KEY=OUT016
4=SUP
5=CB
6=AIR
7=ME
C=RET
D=MIX
E=JEEP
F=OSC
K=AUX
L=COV
M=BS
N=CS
S=HD
T=D1-
U=D2-
V=SEG
3-11
Advertisement
Table of Contents
