Table of Contents
Advertisement
m
. Single levels can be set with 0 to 7, while ranges of
multiple levels can be set with 8 to Z.
. Level button operations are different depending on
whether LEVEL MODE in the Z menu of the secondary
station menu is set to SIGLE or MULTI. When set to
SIGLE, only the level button that is pressed will light up
green, and only that level will be controlled. When set to
MULTI, each press of a level button toggles the corre-
sponding level between selected (light in green) and
deselected (light off) state, which enables control with
multiple levels freely combined.
CONTROL DESTINATION:
Destination terminal for operations setting
Set the name of the destination that is used as the default
when the power is turned on.
In addition, when using this unit as a remote control panel
dedicated for the virtual monitor mode, set the destination
name that you want to assign as a monitor out terminal.
n
For details about the virtual monitor function, refer to
"5-3. Virtual Monitor Function".
To return to the menu screen of the secondary
station
Press [Ctrl] _ [E].
To return to the menu screen of the primary station
Press [Ctrl] _ [D].
BKS-R3219A/R1617A I&SSM
O: SET AVAILABLE SOURCE/DESTINATION
Purpose
This menu sets the selectable destinations and the range of
selectable sources corresponding to the selectable destina-
tions.
Setting procedure
1. Select menu item of the secondary station [O].
SELECT DESTINATION NAME screen
Enables or disables the destination terminal. When dis-
abled, the terminal cannot be selected from the remote
controller.
2. Select a destination to be set using the cursor key.
When the key [(], [)] is pressed while the cursor key
is located either top end or bottom end of display, the
display moves to that of the next terminal number.
The output terminal numbers are from 001 to 1024.
3. Pressing [Enter] toggles between selection and non-
selection of destination shown by cursor.
m
. The destinations whose names are displayed, can be
selected from this remote control.
. The indication " · · · · " means that the name is not
registered yet on the destination table.
. The blank destination cannot be selected from the
panel.
SONY ROUTING SYSTEM SETUP MENU
SELECT DESTINATION NAME
0001=OUT001
0002=OUT002
0005=OUT005
0006=OUT006
0009=OUT009
0010=OUT010
0013=OUT013
0014=OUT014
0017=OUT017
0018=OUT018
0021=OUT021
0022=OUT022
0025=OUT025
0026=OUT026
0029=OUT029
0030=OUT030
0033=OUT033
0034=OUT034
0037=OUT037
0038=OUT038
0041=OUT041
0042=OUT042
0045=OUT045
0046=OUT046
0049=OUT049
0050=OUT050
0053=OUT053
0054=OUT054
0057=OUT057
0058=OUT058
0061=OUT061
0062=OUT062
Ctrl-E:MENU
Ctrl-D:RETURN
Example of Selectable Destination Setting
BKS-R3219A V2.23 STATION NUMBER 4
0003=OUT003
0004=OUT004
0007=OUT007
0008=OUT008
0011=OUT011
0012=OUT012
0015=OUT015
0016=OUT016
0019=OUT019
0020=OUT020
0023=OUT023
0024=OUT024
0027=OUT027
0028=OUT028
0031=OUT031
0032=OUT032
0035=OUT035
0036=OUT036
0039=OUT039
0040=OUT040
0043=OUT043
0044=OUT044
0047=OUT047
0048=OUT048
0051=OUT051
0052=OUT052
0055=OUT055
0056=OUT056
0059=OUT059
0060=OUT060
0063=OUT063
0064=OUT064
Ctrl-F:SELECT SOURCE
3-13
Advertisement
Table of Contents
