Table of Contents
Advertisement
2288H V5 Server
User Guide
Figure 10-1 Removing the battery
Step 7 Place the removed battery in an ESD bag.
----End
10.2 Installing the Battery
Step 1 Wear an ESD wrist strap. For details, see
Step 2 Power off the server. For details, see
Step 3 Remove the power cables. For details, see
Step 4 Remove the server. For details, see
Step 5 Remove the chassis cover. For details, see
Step 6 Take a spare battery out of its ESD bag.
Step 7 Hold the battery with the side marked with text facing upwards, insert the left end of the
battery into the slot, and gently press down the battery until it is properly installed in the slot.
See
Issue 04 (2018-09-04)
Figure
10-2.
Copyright © Huawei Technologies Co., Ltd.
12 Preventing Electrostatic
3.2 Powering Off the
3.7 Removing Cables from a
3.3 Removing the Server and Guide
3.4 Removing the Chassis
Discharge.
Server.
PSU.
Rails.
Cover.
10 Battery
242
Advertisement
Chapters
Table of Contents
