Siemens SINUMERIK 840D sl Function Manual page 361
Extended functions
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Complex compensation
Since it is possible to use the position of an axis as the input quantity (base axis) for several
tables, to derive the total compensation value of an axis from several compensation
relationships (tables) and to multiply tables, it is also possible to implement sophisticated and
complex beam sag and angularity error compensation systems.
This function also makes it possible to deal with different error sources efficiently. For
example, it is possible to combine a table with a modulo function for a periodic recurring
error component with a second table without a modulo function for an aperiodic error
component for the same axis.
Leadscrew errors can also be compensated with this function by parameterizing an identical
axis for the base and compensation axes. However, in contrast to the MSEC, measuring-
system switchovers are not automatically registered in this case.
Activation
The "sag compensation" function does not become active until the following conditions are
fulfilled:
● The option "Interpolatory compensation" has been enabled.
● The function has been activated for the relevant machine axis (compensation axis):
● The compensation values have been stored in the non-volatile NC user memory and are
● Evaluation of the relevant compensation table has been enabled:
● The current measuring system of the base and compensation axes has been referenced:
As soon as these conditions have been fulfilled the setpoint position of the compensation
axis is altered in all modes with reference to the setpoint position of the base axis and the
corresponding compensation value and is then immediately traversed by the machine axis.
If the reference is then lost, e.g. because the encoder frequency has been exceeded
(DB31, ... DBX60.4 or 60.5 = 0), compensation processing is deactivated.
Compensation interpolation points
The number of required interpolation points in the compensation table must be defined for
every compensation relationship and the requisite memory space reserved with the following
general machine data:
MD18342 $MN_MM_CEC_MAX_POINTS (size of FFS)
MD18342 $MN_MM_CEC_MAX_POINTS[t]
with:
[t] = Index of compensation table
with:
(0 ≤ t < 2 * maximum number of axes)
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
MD32710 $MA_CEC_ENABLE [AXi] = 1
active (after power ON).
SD41300 $SN_CEC_TABLE _ENABLE [t] = 1
DB31, ... DBX60.4 or 60.5 =1 (referenced/synchronized 1 or 2)
Compensations (K3)
5.4 Interpolatory compensation
361
- Quick Links:
- Digital and Analog Nck I/Os (A4)
Hide quick links:
Advertisement
Table of Contents
