Special Features Of Continuous Travel - Siemens SINUMERIK 840D sl Function Manual
Extended functions
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
Abort traversing movement
The traversing movement can be stopped and aborted by means of the following operations
or monitoring functions:
● Pressing the same traversing key again (second rising edge)
● Pressing the traversing key for the opposite direction
● RESET
● On deselection of the continuous mode
● On reaching the first valid limitation
● In the event of faults
4.2.3
Special features of continuous travel
Indexing axes
When an axis that is declared as an indexing axis is traversed in continuous mode, it always
traverses to indexing positions. For example, the axis traverses on to the next indexing
position in the direction of travel even if the traversing key is released in inching mode.
References:
/FB2/ Function Manual, Extended Functions; Indexing Axes (T1)
Extended Functions
Function Manual, 01/2008, 6FC5397-1BP10-3BA0
CAUTION
Software limit switches and working-area limitations are only activated after reference
point approach.
Note
While an axis is moving, a change of mode from JOG to AUT or MDI is not permitted
within the control.
Manual and Handwheel Travel (H1)
4.2 Continuous travel
283
- Quick Links:
- Digital and Analog Nck I/Os (A4)
Hide quick links:
Advertisement
Table of Contents
