Table of Contents
Advertisement
IPE
Installation Guide
Step 5 Fix the main body of the high-speed dome IPC onto the bracket. Align the dome IPC with the
bracket. Mount the IPC on the bracket and rotate the IPC clockwise so that the holes on the
bracket are aligned with the screw holes on the installation base of the IPC. Then, lock three
screws between the bracket and the IPC, as shown in Figure 7-10.
Figure 7-10 Fixing the main body of the high-speed dome IPC onto the bracket
Step 6 Install the assembled high-speed dome IPC on the ceiling and fasten the four screws.
----End
7.3.3 Installing the IPC in Embedded Mode
The high-speed dome IPC can be installed on the indoor suspended ceiling in embedded mode.
The installation environment must meet the following requirements:
The suspended ceiling is at least 250 mm away from the concrete ceiling.
The thickness of the ceiling is 8 mm to 40 mm.
The ceiling can bear at least five times of the total weight of the IPC and its accessories.
The installation procedure is as follows:
Step 1 Keep the transparent dome of the IPC upward. Rotate the dome anticlockwise to open the
dome. Take out the foam and remove the protective film on the transparent dome. Then,
rotate the dome clockwise to install the dome.
Issue 03 (2013-02-28)
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
7 Installing a Day & Night High Speed Do me IPC
74
Hide quick links:
Advertisement
Table of Contents
