Table of Contents
Advertisement
IPE
Installation Guide
Figure 3-1 Sticking the positioning label
Step 2 Drill four holes with a diameter of 5.5 mm based on the marks on the positioning label. Drive
the expansion particles into the holes, as shown in Figure 3-2.
Figure 3-2 Installing the expansion particles
Step 3 Mount the IPC on the wall and fasten the screws, as shown in Figure 3-3.
Issue 03 (2013-02-28)
Positioning label
Please drill holes at the positions
marked by the red circles.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
3 Installing an Infrared Waterproof Tube-Type IPC I
10
Hide quick links:
Advertisement
Table of Contents
