Safely-Limited Speed (Sls); General Description - Siemens SINAMICS G130 Manual
Safety integrated
Hide thumbs
Also See for SINAMICS G130:
- List manual (1976 pages) ,
- Operating instructions manual (610 pages) ,
- Engineering manual (530 pages)
Table of Contents
Advertisement
Safety Integrated Extended Functions
6.7 Safely-Limited Speed (SLS)
6.7
Safely-Limited Speed (SLS)
6.7.1
General description
The Safely-Limited Speed (SLS) function is used to protect a drive against unintentionally
high speeds in both directions of rotation. This is achieved by monitoring the current drive
speed up to a speed limit.
Safely-Limited Speed prevents a parameter-assigned speed limit from being exceeded.
Limits must be specified based on results of the risk analysis. Up to 4 different SLS speed
limits can be assigned via parameter p9331[0 to 3]/p9531[0 to 3].
Changeover of speed limits
The switchover is executed binary-coded via two F-DIs or two PROFIsafe control bits. The
speed selection status can be checked using parameters r9720.9/r9720.10. Parameters
r9722.9 and r9722.10 indicate the actual speed limit, bit r9722.4 must carry a "1" signal.
Table 6- 1
F-DI for bit 1 (r9720.10)
The changeover from a lower to a higher speed limit takes effect without any delay.
The changeover from a higher to a lower limit triggers a delay time which can be set at the
corresponding parameter (p9351 and p9551).
SLS level 1 must be defined as the lowest speed limit value.
SLS level 1 is activated after two unacknowledged discrepancy errors; in other words, 0 is
the fail-safe value for the 2 F-DIs for speed level selection. The SLS levels to be switched
between should, therefore, always be assigned via parameter in ascending order, i.e. with
SLS level 1 as the lowest speed and SLS level 4 as the highest.
92
Changeover of speed limits:
F-DI for bit 0 (r9720.9)
0
0
1
1
CAUTION
0
p9331[0]/p9531[0]
1
p9331[1]/p9531[1]
0
p9331[2]/p9531[2]
1
p9331[3]/p9531[3]
Speed limit
Safety Integrated
Function Manual, 05/2010, A5E03264275A
SLS level
1
2
3
4
- Quick Links:
- Preface
Hide quick links:
Advertisement
Table of Contents
