Sony DVCAM DSR-PDX10 Service Manual page 232
Hide thumbs
Also See for DVCAM DSR-PDX10:
- User manual (4 pages) ,
- Operating instructions manual (264 pages) ,
- Supplemental instructions (2 pages)
Table of Contents
Advertisement
3-2.
SYSTEM CONTROL SYSTEM ADJUSTMENT
1. Initialization of 8, A, B, C, D, E, F, 1B, 1E, 1F Page
Data
If the 8, A, B, C, D, E, F, 1B, 1E, 1F page data is erased due to some
reason, perform "1-2. INITIALIZATION OF PAGE DATA" of "5-
1. CAMERA SECTION ADJUSTMENT"
Note: When reading or writing the 1B, 1E, 1F page data, select page: 0,
address: 10, and set data: 01, then select B, E or F page. The 1B. 1E
or 1F page can be chosen by this data setting.
After reading or writing, reset the data of page: 0, address: 10 to
"00".
2. Touch Panel Adjustment
Adjust the calibration of the touch panel.
Mode
VTR stop
Signal
Arbitrary
Adjustment Page
A
Adjustment Address
90 to 93
Note1: Perform this adjustment with observing the LCD screen from the
front.
Note2: The data of page: 0, address: 10 must be "00".
Adjusting method:
1)
Select page: 7, address: 05, and set data: 01.
2)
Using a stylus etc., push the center of "X" indicated in the part
A.
3)
Using a stylus etc., push the center of "X" indicated in the part
B.
4)
Using a stylus etc., push the center of "X" indicated in the part
C.
5)
Check that the data of page:7, address:05 is "00".
A
Fig. 6-3-4.
C
B
6-77
DSR-PDX10/PDX10P
Hide quick links:
Advertisement
Chapters
Table of Contents
