Sony DVCAM DSR-PDX10 Service Manual page 207
Hide thumbs
Also See for DVCAM DSR-PDX10:
- User manual (4 pages) ,
- Operating instructions manual (264 pages) ,
- Supplemental instructions (2 pages)
Table of Contents
Advertisement
DSR-PDX10/PDX10P
2-3-4.
Brake-T Block Assy, T-reel Table Assy, Gooseneck Gear Assy
1. Removal procedure
1)
Remove the brake-T block assy from the brake-T pivot shaft.
2)
While pressing the reel claw retainer A of the T-reel table assy
down in the direction of B, remove the reel claw C.
3)
Remove the gooseneck assy from the relay gear shaft.
Note: Be careful not to break the reel claw.
When attaching it,
bend the gooseneck gear
assy to the S-reel table
assy side.
T-reel table assy
Relay gear shaft
Gooseneck gear assy
A
C
B
E Reel shaft-T
D Brake-T pivot shaft
2. Attachment procedure
1) Insert the gooseneck gear assy into the center hole of the relay
gear shaft. Bend the gooseneck gear assy to the S-reel table
assy side.
2) Attach the brake-T block assy to the brake-T pivot shaft D.
3) Move the brake-T counter-clockwise so that T-brake is freed.
While pressing down the reel claw of the T-reel assy, fix the T-
reel to the reel shaft-T by rotating the reel.
4) Check that the brake spring-T works correctly by rotating the
T-reel table assy 30 degrees in the clockwise and counter-
clockwise directions.
Note: The retainer on top of the brake spring-T must be hooked on the
brake-T pivot shaft D and moved down to the groove.
Move the brake-T
counter-clockwise so that
the T-brake is freed.
Brake-T block assy
S-reel table assy
Fig. 6-2-9.
6-52
Brake-T block assy
Brake spring-T
D Brake-T pivot shaft
Brake-T
Brake gear-T
Brake gear-T must be positioned so that
its steps face downward.
Gooseneck gear assy
T-reel table assy
Relay gear shaft
Move the brake-T counter-clockwise
so that the T-brake is freed.
Hide quick links:
Advertisement
Chapters
Table of Contents
