Siemens SINUMERIK Series Function Manual page 190

Eps network services
Hide thumbs Also See for SINUMERIK Series:
Table of Contents

Advertisement

3 Setting up functions
3.5 Global settings
Function
End address
Accept
Number of lines
Note
The PLC performance index allows you to define how much performance may be
used for the ePS Network Services PLC trigger. Each ePS Network Services PLC
trigger uses a certain number of performance points.
In this way you can control the extent to which the PLC may be occupied by the
ePS Network Services PLC trigger. The PLC performance index must be defined
individually by the machine manufacturer based on the performance capability of
the PLC.
Feedback messages to the PLC
Fig. 3-72: Feedback messages to the PLC
Function
DB10.DBB118
or indiv. data
element
DB10.DBB119
or indiv. data
element
DB10.DBB120
or indiv. data
element
3-190
Description
End of the user data area with the specifica-
tion of the last byte number.
A maximum of 8 bytes can be specified.
 S7 permissible and existing DB
In addition, the start label must be pre-
assigned with 4 bytes before the specified
byte.
Hex: 5D; 65; 50; 53
The memory addresses for address format-
ting are displayed when the data block inter-
face entry is applied.
The number in the display indicates the num-
ber of lines per window that can be shown in
this menu. You can select from 4 to 8 lines. A
scroll bar will then be displayed in the win-
dow.
Description
Determine the S7 data type and S7 format for the data type,
with a label for the content of these variables.
Determine the S7 data type and S7 format for the data type,
with a label for the content of these variables.
Determine the S7 data type and S7 format for the data type,
with a label for the content of these variables.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
INPUT
ACTION
DISPLAY
SELECTION
© Siemens AG 2012 All Rights Reserved
03/2012

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents