Siemens SINUMERIK Series Function Manual page 131
Eps network services
Hide thumbs
Also See for SINUMERIK Series:
- Function manual (956 pages) ,
- Operating manual (940 pages) ,
- Function manual (62 pages)
Table of Contents
Advertisement
03/2012
Function
Remaining
memory
Remaining
performance
Configure PLC
settings
Each trigger can be assigned a label, which determines its behavior at the central
start date for maintenance.
See also Section: Editing the master data of a machine and the general description
of the trigger in Section: Setting up functions.
Definitions:
If a label has been set and a start date, which has not yet been reached, has
been configured in the master data, the trigger will not be initiated.
If the date has been reached or is in the past, the trigger will be initiated
according to the conditions set for it.
If a start date has not been configured, or the label has not been set, the
trigger will be initiated according to the conditions set for it.
"Icons" tab
The absolute address can be edited under "Icons".
Function
Icons
Edit absolute
address
Data type
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
If the name already exists, a consecutive number
is automatically added in parentheses.
If the name is too long, the number added can
only be seen in a tooltip.
Indicates how much memory (in bytes) is left in
the PLC data block for the "PLC variable" triggers
and PLC conditions.
Shows the number (only in the case of bytes) of
PLC variables that can still be used in triggers and
as a condition. Depending on the size of the vari-
able, it may be that 2 counts for one variable.
Since the PLC data blocks are required for the
"PLC variable" trigger, it is possible to branch
directly to the "PLC Settings" window from here.
Description
Displays the list of ANDed comparison opera-
tions in the trigger (in relation to the absolute
addresses). These can be selected individu-
ally for editing purposes.
The system does not support plausibility for
the absolute addresses, their data types, or
the possible comparison operations.
Notice:
Subsequent correction of the absolute ad-
dress data type is not possible. The variable
must be deleted in its entirety, along with its
comparison operation, and a new variable
created.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
DISPLAY
ACTION
Type
TAB
INPUT
DISPLAY
3-131
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Table of Contents
