Fig. 3-4: Quick Filter Bar On The User Interface; Fig. 3-5: Address Bar When The Workpiece Directory Is Open; Fig. 3-6: Address Bar When The Link Is Open - Siemens Sinumerik 840D sl Function Manual
Motion control information system
Hide thumbs
Also See for Sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
05.07
Quick filter bar
Fig. 3-4: Quick filter bar on the user interface
The quick filter function allows you to change a filter value without having to call up
the filter editor.
Once you have selected a filter, the first filter condition of the current filter is
displayed in three fields in the toolbar area. The first two fields contain the field
name and operand, while the third field, which can be edited, contains the current
filter condition value (see also Section 3.2. View filter).
Note
The value of the filter condition is treated in the same way as a value with a
wildcard, although the wildcards are not displayed in this field.
Example:
Program name = A
means that the system filters according to program names that contain "A"
(e.g. Program1, Appl_1, 135_A_xzy).
Program name = A*
means that the system searches for program names that begin with "A"
(e.g. Appl_1, 135_A_xzy ("Program1" will not be found in this search because it
does not begin with "A")).
Address bar
The address bar contains the following information:
The name of the workpiece when the workpiece directory is open
The link path when the link directory is open
Fig. 3-5: Address bar when the workpiece directory is open
Fig. 3-6: Address bar when the link is open
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
DNC Plant/DNC Cell (FBDN1)
3 Operator interface
FBDN1/3-33
Advertisement
Chapters
Table of Contents
