Nc Data Upload (Standard) - Siemens Sinumerik 840D sl Function Manual
Motion control information system
Hide thumbs
Also See for Sinumerik 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
DNC IFC SINUMERIK - Downloading NC Data via a Network (FBDN2)
4 Functions
4.3.2 NC data upload (standard)
NC data (e.g. optimized NC programs) can be selected in the source area and
uploaded to the target area of the DNC Cell/Plant archive.
This target area (group, machine) is set in the configuration user interface.
NC data that belongs to a workpiece is also uploaded to the relevant workpiece
directory of the configured hierarchy level (group, machine) in the DNC archive,
irrespective of their NC data type.
NC data from data management directories for which a pseudo workpiece is
configured in DNC, is uploaded to the relevant pseudo workpiece.
If a type conversion is configured in the configuration file, the file types for the
upload to the DNC are changed in accordance with the conversion tables.
The copying procedures in progress is displayed in the message line.
Before an NC data file is uploaded, a check is made to determine whether the
maximum number of versions of this NC data has already been reached in the
DNC archive. If this is the case, an automatic deletion is performed before the
upload or the Versions Deletion dialog is activated and the user prompted to
delete one of the available old versions, depending on the version strategy. After
the deletion, the operator can decide whether to continue with the upload or cancel
it.
FBDN2/4-22
© Siemens AG 2010 All Rights Reserved
Motion Control Information System DNC (FBDN) - 04/10 Edition
05.07
Advertisement
Chapters
Table of Contents
