Siemens SINUMERIK Series Function Manual page 566

Extended functions

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

N4: Own channel - only 840D sl

9.3 Activation and deactivation

Program code

N180 X800 PON

N190 PDELAYOF X700

Activation of first punch interface

speed I/Os (see Section "Channelspecific machine data (Page 596)", MD26004 and

The first punch interface is always active after a reset or control system power up. If only one

interface is used, then it need not be programmed.

Activation of second punch interface

high-speed I/Os (see Section "Channelspecific machine data (Page 596)", MD26004 and

Programming example:

Program code

N170 SPIF1 X100 PON

N180 X800 SPIF2

activates the first punch interface, i.e. the stroke is controlled via the first pair of high-

activates the second punch interface, i.e. the stroke is controlled via the second pair of

; activate punching. After reaching the

; end position, the punch stroke is output delayed

; Deactivate punching with delay, normal

; initiation of a punching operation. End of the

; At the end of the block, a stroke is initiated at

; the first fast output. The signal "stroke

; active" is monitored at the first input.

; The second stroke is initiated at the

; second fast output. "Stroke active" signal

; is monitored at the second input.

Function Manual, 03/2013, 6FC5397-1BP40-3BA1

Extended Functions

Show Quick Links

Table of Contents

Sinumerik 840d sl Sinumerik 828d