Activating Transformation Machine Data Via Parts Program/Softkey; Transmit Face End Transformation (Option) - Siemens SINUMERIK Series Function Manual
Extended functions
Hide thumbs
Also See for SINUMERIK Series:
- Operating manual (940 pages) ,
- Function manual (332 pages) ,
- Function manual (204 pages)
Table of Contents
Advertisement
M1: Kinematic transformation
6.2 TRANSMIT face end transformation (option)
6.1.5
Activating transformation machine data via parts program/softkey
Most of the machine data relevant to kinematic transformations were activated by POWER
ON up to now.
Transformation machine data can also be activated via the parts program/softkey and it is
not necessary to boot the control.
6.2
TRANSMIT face end transformation (option)
Key statement
The TRANSMIT transformation permits the face end machining on turning machines.
X
Y
Z
XM
ZM
CM
Note
For active transformation, the names of the involved machine, channel and geometry axes
are different:
• MD10000 $MN_AXCONF_MACHAX_NAME_TAB (machine axis name)
• MD20080 $MC_AXCONF_CHANAX_NAME_TAB (channel axis name)
• MD20060 $MC_AXCONF_GEOAX_NAME_TAB (geometry axis name)
350
Geometry axis
Geometry axis
Geometry axis
Machine axis
Machine axis
Machine axis
Function Manual, 03/2013, 6FC5397-1BP40-3BA1
Extended Functions
- Quick Links:
- Access Via Plc
Hide quick links:
Advertisement
Table of Contents
