Configuring the operating system
6.1
Loader
Loader
The following figure shows the Loader.
The buttons on the Loader have the following function:
● The "Transfer" button sets the HMI device to transfer mode
● Press the "Start" button to start the project on the HMI device
● Press the "Control Panel" button to open the HMI device Control Panel
● Press the "Taskbar" button to activate the taskbar with the Windows CE start menu open
The following figure shows the open start menu.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
The transfer mode can only be activated when at least one data channel has been
enabled for the transfer.
If you do not perform an operation, the project on the HMI device will automatically start
after a delay, depending on settings.
You can change various settings in the Control Panel, for example the transfer settings.
6
125