NOTICE
Pay attention to cleanliness. Foreign bodies or liquids must not come into contact with the
printed circuit board or penetrate the inside of the HMI device.
Place the HMI device with the front side facing down on a flat, clean surface to protect
against damage.
Requirements
● You have opened the battery compartment of the HMI device
● The main battery is removed
● You have opened the connection bay of the HMI device
①
②
Procedure for inserting a memory card
Proceed as follows:
1. Insert the memory card into the slot.
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Slot
Memory card symbol
Pay attention to the memory card symbol when inserting the memory card. An arrow on
the memory card indicates the front side and the direction of insertion. When the memory
card is correctly inserted into the slot, it stands approx. 3 mm proud of the slot.
Operator controls and displays
5.6 Using a memory card with the HMI device
115