Labeling The Function Keys - Siemens SIMATIC HMI Operating Instructions Manual
Hmi device
mobile panel 277f iwlan
Hide thumbs
Also See for SIMATIC HMI:
- Operating instructions manual (121 pages) ,
- Start-up instructions (40 pages) ,
- Product information (25 pages)
Table of Contents
Advertisement
Operator controls and displays
5.7 Labeling the function keys
Using a memory card for the first time
NOTICE
Data loss
If the HMI device asks you to perform formatting the first time you use a memory card, back
up any existing data on the memory card first.
Proceed as follows in order to prevent data loss:
1. Cancel the formatting procedure by pressing "ESC".
2. Remove the memory card from the HMI device.
3. Back up any data that you do not want to lose on the memory card.
4. Insert the memory card into the HMI device.
5. Format the memory card on the HMI device.
Procedure for unplugging a memory card
Proceed as follows:
1. Pull the memory card out of the slot.
2. Close the connection bay.
3. Replace the main battery.
4. Close the HMI device's battery compartment.
5. Store the memory card in a safe place.
See also
Distance measurement between HMI device and transponder (Page 61)
Opening and closing the terminal compartment (Page 71)
5.7
Labeling the function keys
Introduction
You can label the function keys as required for your project. Use labeling strips to do so.
NOTICE
Do not write on the keyboard to label the function keys.
116
Mobile Panel 277F IWLAN
Operating Instructions, 12/2007, A5E01003940-01
Hide quick links:
Advertisement
Table of Contents
