Set" Button - Siemens SIMATIC NET Operating Instructions Manual

Network components

Hide thumbs Also See for SIMATIC NET:

Table of Contents

3.6

"SET" button

Information on the "SET" button

Position and functions

On the front of the SCALANCE XC100-4OBR, there is a "SET" button with which you can

control the bypass relay locally.

Using the "SET" button, you can display (display mode) or set (configuration mode) the

startup time and the monitoring voltage.

LED display

The "DM" LED shows the mode in which the device is operating, see section ""DM" LED

(Page 28)".

The LEDs "S1" and "S2" indicate the configuration, see the section "LEDs "S1" and "S2"

(Page 29)".

The various modes

The following graphic shows an overview of the various modes of the "SET" button:

"OFF" mode

In the "OFF" mode, you can neither see nor modify the set configurations.

The LEDs "DM", "S1" and "S2" are off.

In the following section, use of the "SET" button is always described starting from the "OFF"

mode.

SCALANCE XC100-4OBR

Operating Instructions, 10/2013, C79000-G8976-C297-02

Description of the device

3.6 "SET" button

Table of Contents

Scalance xc100-4obr