Using The Basic-Bootware Menu (For All Mpus Except Lsu1Supb0(Jg496A)) - HP 10500 Series Configuration Manual
Hide thumbs
Also See for 10500 Series:
- Security configuration manual (596 pages) ,
- Configuration manual (512 pages) ,
- Specifications (42 pages)
Table of Contents
Advertisement
Enter your choice(0-5): 5
Booting Normal Extended BootWare
The Extended BootWare is self-decompressing........Done.
****************************************************************************
*
*
*
****************************************************************************
Compiled Date
CPU Type
CPU Clock Speed
Memory Type
Memory Size
Memory Speed
BootWare Size
Flash Size
BASIC CPLD Version
EXTENDED CPLD Version : 3.0
PCB Version
BootWare Validating...
Press Ctrl+B to access EXTENDED-BOOTWARE MENU...
Using the BASIC-BOOTWARE menu (for all MPUs
except LSU1SUPB0(JG496A))
To access the BASIC-BOOTWARE menu:
1.
Connect a configuration terminal to the console port of the device.
2.
Power on the device.
RAM test successful.
Press Ctrl+T to start five-step full RAM test...
Press Ctrl+Y to start nine-step full RAM test...
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU...
3.
Press Ctrl+D within three seconds after the "Press Ctrl+D to access BASIC-BOOTWARE MENU..."
prompt message appears. If you fail to do this within the time limit, the system starts to run the
extended BootWare segment.
=====================<BASIC-BOOTWARE MENU (Ver 1.03) >======================
|<1> Modify Serial Interface Parameter
|<2> Update Extended BootWare
|<3> Update Full BootWare
|<4> Boot Extended BootWare
|<5> Boot Backup Extended BootWare
|<0> Reboot
BootWare, Version 1.33
: Nov 20 2014
: XLP316
: 1200MHz
: DDR3 SDRAM
: 8192MB
: 667MHz
: 1536KB
: 500MB
: 4.0
: Ver.A
247
*
*
*
|
|
|
|
|
|
Advertisement
Table of Contents
Troubleshooting
