Automatic Configuration Using Http Server And Python Script - HP 10500 Series Configuration Manual
Hide thumbs
Also See for 10500 Series:
- Security configuration manual (596 pages) ,
- Configuration manual (512 pages) ,
- Specifications (42 pages)
Table of Contents
Advertisement
[DeviceB] dhcp enable
# Configure the address pool 1 to assign IP addresses on subnet 192.168.1.0/24 to clients.
[DeviceB] dhcp server ip-pool 1
[DeviceB-dhcp-pool-1] network 192.168.1.0 24
# Specify the URL of the script file for the clients.
[DeviceB-dhcp-pool-1] bootfile-name http://192.168.1.40/device.tcl
2.
Configure the HTTP server:
# Create the configuration file device.tcl on the HTTP server.
return
system-view
telnet server enable
local-user user
password simple abcabc
service-type telnet
quit
user-interface vty 0 4
authentication-mode scheme
user-role network-admin
quit
interface gigabitethernet 1/0/1
port link-mode route
ip address dhcp-alloc
return
# Start HTTP service software and enable HTTP service. (Details not shown.)
Verifying the configuration
1.
Power on Device A.
2.
After Device A starts up, display assigned IP addresses on Device B.
<DeviceB> display dhcp server ip-in-use
IP address
192.168.1.2
3.
Telnet to 192.168.1.2 from Device B.
<DeviceB> telnet 192.168.1.2
4.
Enter the username user and password abcabc as prompted. (Details not shown.)
You are logged in to Device A.
Automatic configuration using HTTP server and Python script
Network requirements
As shown in
Client identifier/
Hardware address
0030-3030-632e-3239-
3035-2e36-3736-622d-
4574-6830-2f30-2f32
Figure
49, Device A does not have a configuration file.
Lease expiration
Dec 12 17:41:15 2013
211
Type
Auto(C)
Advertisement
Table of Contents
Troubleshooting
