Notes; Notes On Using The Manual - Siemens SIMATIC S5 Manual
Positioning module
1p 247
for stepper motors
Hide thumbs
Also See for SIMATIC S5:
- Manual (396 pages) ,
- Equipment manual (197 pages) ,
- Operating instructions manual (43 pages)
Table of Contents
Advertisement
Notes
1.1
Notes on Using the Manual
This manual describes a system for position control of three independent drives.
system comprises the following components:
The
COM 247 communications software
standard function blocks FBI 64 and FBI 65
The IP247 positioning module represents the link between your plant and the programmable
controller (PC). The standard function block FBI 64 is used for operating and monitoring, and
FB165 for assigning parameters to the IP247. With the programming package COM247, you can
generate, save and print machining programs and machine data. COM247 is also used to test
the IP247 online with the plant connected.
This manual refers to the following products:
The module IP247
The version for ventilated operation, single width, without additional heat sink, order num-
ber6ES5247-4UA31.
The version for non-ventilated operation, double width, with additional heat sink, order
number6ES5247-4 UA41.
The communications software COM247
From release A02.0,
order number 6ES5 895- 5SB22.
The standard function blocks FB164 and FB165
For the S5-1 15,
order number 6ES5 845- 8TA01,
For the S5-135 with CPU922 or928,
order number 6ES5 842- 8TBOI.
For the S5-150,
order number 6ES5 844- 8TA01.
For the S5-155,
order number 6ES5 846- 8TA01.
Siemens AG°C7900WS57S-C70741
Notes on Using the Manual
Advertisement
Table of Contents
