Siemens SINUMERIK 828D Operating Manual page 313
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Machining type
Deselected
Finishing
Rough-finishing
Roughing
Additional G commands that are available in conjunction with machining free-form surfaces,
are also activated in the High Speed Settings cycle.
When deselecting CYCLE832, the G groups are programmed to the settings - during the
program run time - that are declared in the machine data for the reset state.
References
For additional information, please refer to the following references:
HMI sl / SINUMERIK 840D sl Commissioning Manual
Procedure
Parameter
Description
Tolerance
Tolerance of the machining axis
Machining
∇ (roughing)
•
∇∇∇ Rough finishing (rough finishing)
•
∇∇∇ (finishing)
•
Deselected
•
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
Technology G group 59
DYNNORM
DYNFINISH
DYNSEMIFIN
DYNROUGH
Machine manufacturer
Please also refer to the machine manufacturer's instructions.
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Various" softkey.
3.
Press the "High Speed Settings" softkey.
The "High Speed Settings" input window is opened.
Programming technological functions (cycles)
8.4 Further cycles and functions
Unit
313
Advertisement
Table of Contents
