Siemens SINUMERIK 828D Operating Manual page 249
Hmi sl milling
Hide thumbs
Also See for SINUMERIK 828D:
- Function manual (1799 pages) ,
- Commissioning manual (1167 pages) ,
- Operating manual (926 pages)
Table of Contents
Advertisement
Procedure
Parameters, G code program
PL
Machining plane
Milling direction
RP
Retraction plane
SC
Safety clearance
F
Feedrate
Parameter
Description
FZ
Depth infeed rate
(only for G code)
Reference point
The following different reference point positions can be selected:
•
•
•
•
•
∇ (roughing)
Machining
•
∇∇∇ (finishing)
•
Chamfering
•
Single position
Machining
•
position
A rectangular spigot is machined at the programmed position (X0, Y0, Z0).
Position pattern
•
Several rectangular spigots are machined in a position pattern
(e.g. full circle, pitch circle, grid, etc.).
The positions refer to the reference point:
X0
Reference point X – (for single position only)
Y0
Reference point Y – (for single position only)
Z0
Reference point Z – (for single position only)
W
Width of spigot
L
Length of spigot
HMI sl Milling
Operating Manual, 06/2009, 6FC5398-7CP20-0BA0
1.
The part program or ShopMill program to be processed has been
created and you are in the editor.
2.
Press the "Milling" softkey.
3.
Press the "Multi-edge spigot" and "Rectangular spigot" softkeys.
The "Rectangular Spigot" input window opens.
mm (in)
mm
mm/min
(center)
(bottom left)
(bottom right)
(top left)
(top right)
Programming technological functions (cycles)
Parameters, ShopMill program
T
Tool name
D
Cutting edge number
F
Feedrate
S / V
Spindle speed or constant
cutting rate
8.2 Milling
mm/min
mm/rev
rpm
m/min
Unit
mm/min
mm
mm
mm
mm
mm
249
Advertisement
Table of Contents
