Adding The Four-Channel Cavity Combiner; Figure 202: Atcc Cabling Diagram - Mts 4 With 1 Tx Antenna After Expansion - Motorola DIMETRA MTS 4 Installation, Configuration, And Service Manual
Dimetra ip scalable (dips); dimetra ip compact (dipc)/scalable dimetra ip (sdip); dimetra ip micro/dimetra ip lite
Hide thumbs
Also See for DIMETRA MTS 4:
Table of Contents
Advertisement
Applicant: Motorola Solutions
396 | Expansion Options
Figure 202: ATCC Cabling Diagram — MTS 4 with 1 TX Antenna after Expansion
Adding the Four-Channel Cavity Combiner
Follow the process below to install the Cavity Combiner.
Note: Procedure is the same whether it is an Auto Tuned Cavity Combiner (ATCC) or a Manual Tuned
Cavity Combiner (MTCC) being installed.
Caution: The cavity Combiner can weigh up to 11.8 kg (26 lbs.). Use caution when removing or installing
Cavity Combiner into the equipment rack. Make sure the combiner is fully supported when free from
mounting rails to avoid injury to personnel and equipment damage.
Process:
1 Install the new Cavity Combiner into the cabinet.
See
Installing the Cavity Combiner into the Cabinet on page
2 Update the mapping list with the new unit TrackID.
See
Updating the Mapping List with the New TrackID on page
Send Feedback
| September 2014 | 6802800U74-AD
Equipment Type: ABZ89FC5827 / 109AB-5827
397.
256.
Exhibit D2
- Quick Links:
- Mts 4 Components
Hide quick links:
Advertisement
Chapters
Table of Contents
