3.2.2
Safety information
Danger
After disconnecting all the supply voltages, a hazardous voltage will be present at all Power
Modules for another 5 minutes. Work cannot be carried out until this time has elapsed.
Danger
The DC link discharge voltage hazard warning in the local language must be attached to all
of the components.
Caution
The cooling clearances above, below, and in front of the component, which are specified in
the dimension drawings, must be observed.
Danger
Cable shields and unused power cable conductors must be connected to PE potential to
prevent capacitive cross-talk charges.
Non-observance can cause lethal shock voltages.
Equipment Manual AC Drive
Manual, (GH6), 03/2006 Edition, 6SL3097-2AL00-0BP0
Power Modules
3.2 Power Modules Chassis
3-43