Position in the Information Landscape
When working with ET 200pro fail-safe modules and depending on your particular
application, you will need to consult the additional documentation listed below.
References to additional documentation are included in this manual where appropriate.
Documentation
ET 200pro Distributed I/O
System
Manual
Safety Engineering in
SIMATIC S7
System
Description
For integration in the
S7 Distributed Safety fail-safe
system
STEP 7
manuals
STEP 7
Online Help
PCS 7
manuals
The entire SIMATIC S7 documentation is available on CD-ROM.
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
Brief Description of Relevant Contents
Describes all generally applicable topics for the ET 200pro hardware (including
configuration, installation, and wiring of ET 200pro)
Provides an overview of the application, configuration, and method of operation of
•
S7 Distributed Safety and S7 F/FH Systems fail-safe automation systems
Contains a summary of detailed technical information concerning fail-safe engineering
•
in S7-300 and S7-400
Includes monitoring and response time calculations for S7 Distributed Safety and
•
S7 F/FH Systems fail-safe systems
The following elements are described in the
Programming
Operating Manual and Online Help:
Configuration of the F-CPU and the F-I/O
•
Programming of the F-CPU in F-FBD or F-LAD
•
Depending on which F-CPU you are using, you will need the following documentation:
S7-300, CPU 31xC and CPU 31x Operating Instructions: Installation
The
•
assembly and wiring of S7-300 systems.
CPU 31xC and CPU 31x, Technical Data
The
•
of the CPU 315-2 DP and PN/DP and the CPU 317-2 DP and PN/DP.
Automation System S7-400 Hardware and Installation
The
•
describes the assembly and wiring of S7-400 systems.
Automation System S7-400 CPU Specifications
The
•
CPU 416-2.
Each applicable F-CPU has its own product information bulletin. These product
•
information bulletins describe only the deviations from the relevant standard CPUs.
Configuring Hardware and Communication Connections with STEP 7 V5.x
The
•
describes the operation of the relevant standard tools of
System Software for S7-300/400 System and Standard Functions
The
•
Manual describes functions for distributed I/O access and diagnostics.
Describes how to operate the standard tools of
•
Contains information about how to configure and assign parameters for modules and
•
intelligent slaves with
Contains a description of the FBD and LAD programming languages
•
Describe how to operate the
•
with fail-safe modules is integrated in a higher-level control system).
S7 Distributed Safety Configuring and
Manual describes the standard functions
HW Config
PCS 7
process control system (required when ET 200pro
Installation Manual
Reference Manual describes
STEP 7
.
Reference
STEP 7
Preface
describes the
Manual
5