Lacp System-Priority; Link-Aggregation Lacp Traffic-Redirect-Notification Enable - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Examples
# Set the LACP timeout interval on Ethernet 1/0/1 to the short timeout interval (1 second).
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] lacp period short
lacp system-priority
Syntax
lacp system-priority system-priority
undo lacp system-priority
View
System view
Default level
2: System level
Parameters
system-priority: Specifies the LACP priority of the local system, in the range of 0 to 65535. The smaller the
value, the higher the system LACP priority.
Description
Use lacp system-priority to set the LACP priority of the local system.
Use undo lacp system-priority to restore the default setting.
By default, the system LACP priority is 32768.
Examples
# Set the system LACP priority to 64.
<Sysname> system-view
[Sysname] lacp system-priority 64
link-aggregation lacp traffic-redirect-notification enable
Syntax
link-aggregation lacp traffic-redirect-notification enable
undo link-aggregation lacp traffic-redirect-notification enable
View
System view
Default level
2: System level
Parameters
None
91
Hide quick links:
Advertisement
Chapters
Table of Contents
