Display Packet-Drop Interface - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
Field
OAM connection failure
DLDP connection failure
Loopback detection-protected
BPDU-protected
Monitor-Link uplink down
display packet-drop interface
Syntax
display packet-drop interface [ interface-type [ interface-number ] ] [ | { begin | exclude | include }
regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
interface-type: Specifies an interface type.
interface-number: Specifies an interface number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use display packet-drop interface to display information about packets dropped on an interface or
multiple interfaces.
If you do not specify an interface type, this command displays information about dropped packets
•
on all the interfaces on the switch.
If you specify an interface type only, this command displays information about dropped packets on
•
the specified type of interfaces.
•
If you specify both the interface type and interface number, this command displays information
about dropped packets on the specified interface.
Examples
# Display information about dropped packets on Ethernet 1/0/1.
<Sysname> display packet-drop interface ethernet 1/0/1
Description
OAM connection fails (possibly because the connection fails to be established
or the connection is disconnected).
DLDP connection fails (possibly because the connection fails to be established
or the connection is disconnected).
The interface is shut down because a loop is detected on it.
The interface is shut down by the BPDU guard function.
The uplink of the monitor link group to which the interface belongs is down.
15
Hide quick links:
Advertisement
Chapters
Table of Contents
