Speed Auto - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
undo port-group manual port-group-name
View
System view
Default level
2: System level
Parameters
port-group-name: Sets the port group name, a string of 1 to 32 characters.
Description
Use port-group manual to create a port group and enter port group view.
Use undo port-group manual to remove a port group.
By default, no port group exists.
Examples
# Create port group group1.
<Sysname> system-view
[Sysname] port-group manual group1
[Sysname-port-group-manual-group1]
speed auto
Syntax
speed auto { 10 | 100 } *
undo speed
View
Layer 2 Ethernet interface view
Default level
2: System level
Parameters
10: Sets 10 Mbps as an option for speed auto negotiation.
100: Sets 100 Mbps as an option for speed auto negotiation.
Description
Use speed auto to set options for speed auto negotiation.
Use undo speed to restore the default.
By default, an Ethernet interface automatically negotiates a speed with the peer.
The speed command and the speed auto command supersede each other. The command that is
configured last takes effect.
If you configure speed 10 after configuring speed auto 10 100 on an interface, the interface speed is set
to 10 Mbps by force without negotiation. If you configure speed auto 10 100 after configuring speed 10
on the interface, the interface negotiates with its peer, and the negotiated speed is either 10 Mbps or
100 Mbps.
41
Hide quick links:
Advertisement
Chapters
Table of Contents
