Stp Loop-Protection - HP 3600 v2 Series Command Reference Manual
Hide thumbs
Also See for 3600 v2 Series:
- Command reference manual (510 pages) ,
- Configuration manual (449 pages) ,
- Security configuration manual (398 pages)
Table of Contents
Advertisement
[Sysname] stp enable
# In PVST mode, enable the spanning tree feature globally and in VLAN 2.
<Sysname> system-view
[Sysname] stp mode pvst
[Sysname] stp enable
[Sysname] stp vlan 2 enable
# In MSTP mode, disable the spanning tree feature on port Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] undo stp enable
stp loop-protection
Syntax
stp loop-protection
undo stp loop-protection
View
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default level
2: System level
Parameters
None
Description
Use stp loop-protection to enable the loop guard function on the ports.
Use undo stp loop-protection to restore the default.
By default, the loop guard function is disabled.
Configured in Ethernet interface view, the setting takes effect only on the interface.
Configured in port group view, the setting takes effect on all ports in the port group.
Configured in Layer 2 aggregate interface view, the setting takes effect only on the aggregate interface.
Configured on a member port in an aggregation group, the setting takes effect only after the port leaves
the aggregation group.
You cannot configure edge port settings and loop guard, or configure root guard and loop guard on a
port at the same time.
Related commands: stp edged-port and stp root-protection.
Examples
# Enable the loop guard function on Ethernet 1/0/1.
<Sysname> system-view
[Sysname] interface ethernet 1/0/1
[Sysname-Ethernet1/0/1] stp loop-protection
133
Hide quick links:
Advertisement
Chapters
Table of Contents
