Panasonic AG-UMR20P Operating Instructions Manual page 63

Memory card portable recorder
Hide thumbs Also See for AG-UMR20P:
Table of Contents

Advertisement

[DF MODE]
Select the compensation mode for the time code.
≥ Set [SYSTEM FREQ] to [59.94Hz].
Select the menu.
: [TC/UB SETUP] # [DF MODE] # desired setting
[DF]:
[NDF]:
≥ This item will be set to [NDF] automatically in following cases:
j When the frame rate in [REC FORMAT] is 23.98p
≥ This item will be automatically set to [NDF] and will not be displayed as a menu item when [SYSTEM FREQ] is set
to [50.00Hz].
(l
40)
[TCG]
Sets the way the time code will move.
Select the menu.
: [TC/UB SETUP] # [TCG] # desired setting
*
[FREE RUN]
:
[REC RUN]:
* If the frame rate in [REC FORMAT] or is set to 23.98p, a slight time error may occur when switching to Playback
Mode.
(l
212)
≥ It is automatically set to [FREE RUN] in following cases:
j When PRE-REC is enabled
≥ The time code will reset when the built-in lithium battery is exhausted when it is set to [FREE RUN].
[TC PRESET]
You can set the initial time code.
1
Select the menu.
: [TC/UB SETUP] # [TC PRESET]
2
Touch the item to set and change with
≥ The display will be set to "00h00m00s00f" if you touch [Reset].
≥ "h" is an abbreviation for hour, "m" for minute, "s" for second and "f" for frame.
3
Touch [EXIT] to complete the setting.
≥ This unit will adjust the time code in accordance with the frame rate of the [REC FORMAT]
may not be continuous from the previous final time code when the recording format is changed.
≥ Counting may not continue from the previous final time code when the Operation Mode is switched from SDI Mode
to CAM Mode.
≥ If the frame rate in [REC FORMAT] is set to 23.98p, set the number of frames to [00] or a multiple of 4. If you enter
a different value, time code will not be recorded correctly.
(l
40)
Time code is compensated in accordance with the actual time. It is mainly used for
broadcasting such as TV programs.
It will not compensate the time code. (There will be a difference from the actual time)
It will constantly move.
It will move only when recording.
(l
70, 214)
(l
212)
/
.
- 63 -
(l
212). Therefore, it

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ag-umr20e

Table of Contents