Table of Contents
Advertisement
Preparation
Input SDI to this unit (SDI Mode)
A Camera recorder (SDI output device)
B SDI OUT terminal
C BNC cable (commercially-available)
Connect the SDI output device to this unit with a BNC cable.
≥ Use the 5C-FB compatible double shielded cable for the BNC cable (commercially available product) to connect to
the SDI IN terminal and the SDI OUT terminal.
≥ This unit will start up in the SDI Mode when it is turned on as follows.
j When the power button is pressed and held for 2 seconds or longer when the Camera Head is not connected
(l
31)
j When the power button is pressed and held for 2 seconds or longer while the USER1 button is pressed and held
∫ Functions that cannot be set in the SDI Mode
The following functions cannot be set on this unit in the SDI Mode. Set on the SDI output device side.
j Switching Recording Mode
j Adjustment of picture quality
j Zoom
(l
46)
j Image stabilization
j Focus
(l
48)
j White balance
(l
52)
j Iris
(l
54)
j Gain
(l
56)
j Shutter speed
(l
58)
≥ There are other USER button functions and menus that cannot be used in the SDI Mode. For details, refer to the
following pages.
j Functions of the USER button
j Using the SHIFT button
j Menu structure
(l
(l
43)
(l
44)
(l
47)
(l
67)
(l
76)
194)
- 30 -
HD SDI
IN
Advertisement
Table of Contents
