Table of Contents
Advertisement
Performing network setup with the "Easy IP Setup Software"
(For Windows)
Network setup of this unit can be performed with the "Easy IP Setup Software".
Check the following website, and download and install the "Easy IP Setup Software".
http://pro-av.panasonic.net/
∫ Use the Easy IP Setup Software to establish the unit's settings
The settings related to the unit's network can be established using the Easy IP Setup Software.
When using multiple units of this product, set up each Camera Head or unit.
If it is not possible to set up using the Easy IP Setup Software, perform the setup of this unit and a PC individually
using the [NETWORK SETUP] menu of this unit or the network page in the Setup menu of the web screen.
For details, refer to page
≥ If, after the network settings have been established, another device in the same network has the same IP address,
the network operations will not be performed properly.
Set the IP address in such a way that it does not duplicate an existing IP address.
≥ Do not use more than one copy of the Easy IP Setup Software to simultaneously perform the network setup for one
Camera Head or Recorder.
Similarly, do not perform the "Auto IP setting" operation of the remote camera controller (AW-RP50 or AW-RP120) at
the same time.
The IP address settings may no longer be recognized as a result.
≥ When you start the Easy IP Setup Software, you may be asked for the administrator account password.
≥ To enhance security, the Easy IP Setup Software is designed so that when around 20 minutes have passed after the
Recorder was turned on, the network setup of the target Camera Head or the Recorder can no longer be configured.
→ When "20min" is selected for the enable time among the " Easy IP Setup accommodate period ".
≥ The Easy IP Setup Software cannot be used from a different subnet via a router.
∫ Setup method
1
Start the Easy IP Setup Software.
2
Click the [Search] button.
128
or 166.
- 125 -
(l
168)
Advertisement
Table of Contents
