Samsung DCS Programming Manual page 114
Combined systems
Hide thumbs
Also See for DCS:
- Technical manual (287 pages) ,
- Programming manual (277 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
SAMSUNG
COMBINED SYSTEMS PROGRAMMING MANUAL
MMC: 303
FOR:
Purpose: Assigns BOSS stations to SECRETARY stations. One BOSS station can
have up to four SECRETARY stations, and one SECRETARY station can have up to
four BOSS stations.* A dedicated BOSS key must be programmed on the SECRETARY
keyset(s). A dedicated BOSS key must also be programmed on the BOSS keyset(s).
* For 408/408i systems, a BOSS station can have up to two SECRETARY stations, and vice
versa.
The
"F" key
is used to toggle the BOSS/SECRETARY field. (See key layouts in Part 1,
section
1.5.2.)
ACTION
1. Open programming and select 303
Display shows
(If you want to set up the boss stations for a
selected secretary station, press the
change the display to SECR STN. The following
example describes setting up secretary stations for
a selected boss station, but the procedure is the
same for both.)
2. Dial BOSS station number (e.g., 205)
OR
Press VOLUME keys to select station and press
RIGHT soft key
3. Dial SECRETARY station number (e.g., 201)
OR
Press VOLUME keys to select station
Press RIGHT soft key to return to step 3 to enter
more SECR numbers
4. Press LEFT soft key to return to step 2 and
continue entries
OR
Press Transfer/TRSF to store and exit
OR
Press SPEAKER to store and advance to next
MMC
Default Data:
Related Items:
ASSIGN BOSS/SECRETARY
ALL SYSTEMS
NONE
MMC 722 Station Key Programming
MMC 303 (Page 1 of 1)
DISPLAY
BOSS STN:NONE
SECR 1:NONE
F key
to
BOSS STN :205
SECR 1:NONE
BOSS STN:205
SECR 1:201
BOSS STN:205
SECR 2:202
MMC PROGRAMS
FEBRUARY 2004
Hide quick links:
Advertisement
Table of Contents
