Remove and Replace the Rear Bezel Feet
The two rear bezel feet allow the projector to stand upright on the rear bezel. Each foot adheres to the
rear bezel without fasteners.
1.
Remove a rear bezel foot by inserting a small flat blade screwdriver or dental pick between the
foot and the rear bezel.
2.
Gently peel the foot away from the bezel. You don't need to remove any adhesive remaining on
the rear bezel after you remove the foot.
To replace a bezel foot, peel the protective paper from the replacement foot. Then press the foot into the
recess on the rear bezel.
TDP-MT8 Service Guide
53