Table of Contents
Advertisement
Remove and Replace the Outer Handle
The to outer handle covers the front of the projector and helps to secure the top case to the bottom case.
Pins on the handle fit into holes through tabs on the top and bottom cases. When the pins engage the
holes, the top and bottom cases lock together at the front of the projector and hold the outer handle in
place.
The outer handle contains the front IR lens. The lens snaps into the recess in the outer handle. A new
outer handle does not include a front IR lens.
1.
Insert a small flat blade screwdriver behind the edge of the outer handle near the lens
2.
Gently pry the edge of the outer handle away from the projector.
CAUTION
Don't pry against the focus ring or lens.
3.
Pull the handle away from the projector. The pins on the handle disengage from the holes on the
front of the projector.
TDP-MT8 Service Guide
41
- Quick Links:
- Power and Start-Up Problems
Hide quick links:
Advertisement
Table of Contents
