Disassembling The Crane Transport Assembly; Connection To The Foundation - Siemens SINAMICS S120 Manual
Modular motion control drive
Hide thumbs
Also See for SINAMICS S120:
- Function manual (1094 pages) ,
- Diagnostic manual (947 pages) ,
- Manual (848 pages)
Table of Contents
Advertisement
3.3.4
Disassembling the crane transport assembly
With option M90 (crane transport assembly), the Cabinet Modules are equipped with either
transport eyebolts or mounting rails.
Dismantling
The transport eyebolts can be unscrewed and removed. Depending on the length of the
cabinet or transport unit, the support rails can have a varying number of fastening screws.
These must be unscrewed and removed before the rails can be removed.
The support rails are heavy and must be removed very carefully.
Screws can fall into the unit as it is disassembled and cause serious damage when the
equipment is started up.
3.3.5
Connection to the foundation
Preparatory steps
● Disconnect the cabinet units to be installed from the power supply.
● Allow unimpeded access to the holes at the bottom of the cabinet units (if necessary,
Connection to the foundation
Four holes for M12 screws are provided on each cabinet panel to secure the cabinet to the
ground. The fixing dimensions are specified on the associated dimension drawings.
Note
Further dimensions can be found in the relevant dimension drawings on the customer DVD
supplied with the device.
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
WARNING
remove the protective covers when carrying out installation work).
Mechanical installation
3.3 Installation
51
Hide quick links:
Advertisement
Table of Contents
