NOTE
• The pause time differs in length, depending on whether it is entered in the middle or at
the end of a fax number.
- The pause time entered in the middle of a fax number (lower-case p) is set to four
- The pause time entered at the end of a fax number (upper-case P) is set to 10
• Two or more pauses can be entered consecutively.
• Enter a pause time long enough to allow the dial tone to be heard after the
2
international access code is dialed.
5
6
2-54
Advanced Sending Methods
seconds long by default. This can be changed to any length between 1 and 15
seconds. (See "Adjusting the Pause Time," on p. 7-25.)
seconds long. (This length cannot be changed.)
Enter the country code, the area
code, and the fax number using
-
(numeric keys).
If necessary, press [Pause] to
enter a pause time at the end of
the fax number.