5
[On]:
[Off]:
6
Press
Adjusting the Pause Time
Some overseas dialing may be affected by the distance or complex routing of
connections when dialing the international access code, country code, and the
destination's telephone number all at once. In such cases, insert a pause after the
international access code. This helps to improve the connection.
NOTE
• You can insert a pause when you dial the fax number using
(See "Sending a Fax," on p. 2-24, and "Calling from an Extension," on p. 2-50.)
• Pauses entered at the end of dialed fax numbers are always 10 seconds long.
• The default setting is '4sec(s)'.
1
Press
[TX Settings] under <Fax Settings>.
For help, see steps 1 to 3 in "Sending with Error Correction Mode (ECM
Transmission)," on p. 7-23.
Uses ECM.
Does not use ECM.
(Reset) to return to the top screen.
(Additional Functions) ➞ [Communications Settings] ➞
Select [On] or [Off] ➞ press [OK].
-
Transmission Related Items
7
(numeric keys).
7-25