(7)
Disconnect 2 connectors, remove 3 screws
and take off the bracket.
(8)
Remove 1 E-ring and take off the guide roller
on the front side.
(9)
Remove 1 screw and the gear.
(10) Remove 3 screws. Take off 1 bearing and the
bracket.
e-STUDIO182/212/242
DEVELOPMENT SYSTEM
Connector
E-ring
Guide roller
Gear
Bearing
Bracket
© 2009 TOSHIBA TEC CORPORATION All rights reserved
11 - 16
Bracket
Fig. 11-21
Fig. 11-22
Fig. 11-23
Fig. 11-24