(3)
Release the harness from the harness clamp
and pull out the discharge LED.
10.7.4
Main charger
(1)
Take off the discharge LED unit.
P.10-12 "10.7.3 Discharge LED (ERS)"
(2)
Pull out the main charger and take it off by
sliding it to the rear side.
Note:
Be careful not to touch or scratch the drum
surface at this time.
10.7.5
Main charger grid
(1)
Take off the main charger.
P.10-13 "10.7.4 Main charger"
(2)
Remove the spring and take off the main
charger grid.
Note:
Do not touch the mesh area of the grid.
© 2009 TOSHIBA TEC CORPORATION All rights reserved
Fig. 10-16
Fig. 10-17
Main charger grid
Fig. 10-18
10 - 13
Discharge LED
Main charger
Spring
e-STUDIO182/212/242
DRUM RELATED SECTION
10