MULTIPLE PRIMARY SETUP
Figure 5-1 Multi Cell Setup
5-2
13. Click on Save and Reboot.
14. Login to the Primary of the first building. Go to the Multi-cell screen.
15. In the Base Station Group section, on the line with IP Status showing
"This Unit" set the DECT sync source to; Select as primary.
16. Click on the Save button above the Base Station Group.
17. Login to the Primary of the second building. Go to the Multi-cell
screen.
18. In the Base Station Group section, on the line with IP Status showing
"This Unit" set the DECT sync source to; Select as primary.
19. Click on the Save button above the Base Station Group.
IP4100 Install Sept., 2013